Ergonomic analysis of physical load in transport and cargo handling

A case with reba method

Autores

DOI:

https://doi.org/10.5965/2316796313262024113-145

Palavras-chave:

Ergonomic Work Analysis, Cargo handling, Physical load, Worker's health, Risk management

Resumo

The transportation and handling of loads often require operators to exert physical force to reach their final destination. Therefore, it is crucial for fleet managers to adequately manage the risks involved in these activities. The present study aims to perform an ergonomic analysis of the physical workload using the Rapid Entire Body Assessment (REBA) method and to demonstrate that this method can be effective in the decision-making process of managers regarding ergonomic issues. The method provides rapid results on the impacts of physical workload on the worker's body, making it a valuable tool for managers to assess and address ergonomic risks. The results showed that the method was useful for the proposed situation and that operators perform 50% of their activities under a very high ergonomic risk.

Downloads

Não há dados estatísticos.

Biografia do Autor

Douglas Vieira Barboza, Fluminense Federal University

PhD in Sustainable Management Systems at Fluminense Federal University (2022), Master in Biosystems Engineering at Fluminense Federal University (2017), Specialist in Occupational Safety Engineering at Fluminense Federal University (2015), Graduated in Petroleum Engineering (2013) and currently professor of the Fluminense Federal University and University of Vassouras.

Marcelo Jasmim Meiriño, Fluminense Federal University

PhD in Civil Engineering at Fluminense Federal University, Master in Civil Engineering atFluminense Federal University, Specialist in Occupational Safety Engineering at Fluminense Federal University, Graduated in Architecture and Urbanism at Federal University of Rio de Janeiro and is currently Professor at UFF and Coordinator of Graduate Program in Management Systems.

Maximiliano dos Santos Alves, University of Lagos

Production Engineer

Rafael Espíndula da Silva Marinho, Fluminense Federal University

Master's student in Biosystems Engineering at Fluminense Federal University and Graduated in Production Engineering with technical experience in work safety.

Referências

ABRAHÃO, J. et al. Introdução à ergonomia: da prática à teoria. São Paulo: Blucher, 2009.

ABRAMO, l. Uma década de promoção do trabalho decente no brasil: uma estratégia baseada no diálogo social. Genebra: Organização Internacional do Trabalho [OIT], 2015.

BARBOZA, D. V. et al. Análise ergonômica de postura em consultório odontológico: um estudo de caso. Pens@r Acadêmico, v. 19, n. 3, p. 710-726, 2021.

BARBOZA, D. V.; BOÊTA, L. M. M.; SILVA-JUNIOR, A. J. Avaliação da carga de trabalho em garçons de um restaurante em Niterói utilizando o método NASA-TLX. Projectus, v. 1, n. 1, p. 67-70, 2016.

BARBOZA, D. V.; TEIXEIRA, M. A.; LIMA, G. B. A. Análise de riscos de um posto de combustíveis em Itaipuaçu utilizando a técnica HazOp. Revista Gestão Industrial, v. 13, n. 2, 2017.

BELLA, R. L. F. et al. Resilience meets sustainable and spiritual background into an initial review for the new normal after the COVID-19 Pandemic. Frontiers in Sustainability, v. 2, p. 638570, 2021.

BRASIL. Ministério do Trabalho. Portaria MTb n.º 3.214, de 08 de junho de 1978 - NR-17- Ergonomia. Diário Oficial da República Federativa do Brasil, Brasília, 1978.

CARVALHO-NETO, M. R. Benefícios advindos da ergonomia e da prática da ginástica laboral. Revista Ibero-Americana de Humanidades, Ciências e Educação, v. 8, n. 2, p. 316-329, 2022.

CUNHA, F. M.; MENDES, A. Revisão narrativa sobre a questão da saúde do trabalhador no Sistema Único de Saúde. Journal of Management & Primary Health Care, v. 13, p. e018, 2021.

FAYOMI, O. S. I. et al. Advances in concepts of ergonomics with recent industrial revolution. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2021. p. 012010.

FIEDLER, N. C.; VENTUROLI, F.; MINETTI, L. J. Análise de fatores ambientais em marcenarias no Distrito Federal. Revista Brasileira de Engenharia Agrícola e Ambiental, v. 10, n. 3, p. 679-685, 2006.

FBS SISTEMAS. Software Ergolândia 7.0. Disponível em: <https://www.fbfsistemas.com/ergonomia.html>. Acesso em: 10 fev. 2023

HIGNETT, S.; MCATAMNEY, L. Rapid Entire Body Assessment (REBA). Applied Ergonomics. v. 31, n. 2, p. 201-205, 2000. https://doi.org/10.1016/S0003-6870(99)00039-3

IEA - International Ergonomics Association. Principles and guidelines for human factors/ergonomics (HFE) design and management of work systems. Genebra: International Labour Organization, 2021.

IIDA, I.; GUIMARÃES, L. B. M. Ergonomia: projeto e produção. 3 ed. São Paulo: Blucher, 2018.

LIMA, T. B. W. et al. Prevalência de sintomas osteomusculares e qualidade de vida de trabalhadores técnicos administrativos. Revista Brasileira de Medicina do Trabalho, p. 45-50, 2020.

MAAS, Larissa et al. Norma Regulamentadora 17: considerações para sua revisão. Human Factors in Design, v. 9, n. 17, p. 137-162, 2020.

MATTOS, A. K. M. et al. Avaliação da carga de trabalho em uma operadora de serviços de saúde na Região dos Lagos. Brazilian Journal of Production Engineering, v. 5, n. 2, p. 31-43, 2019.

PRODANOV, C. C.; FREITAS, E. C. Metodologia do trabalho científico:métodos e técnicas da pesquisa e do trabalho acadêmico. 2 ed. Novo Hamburgo: Feevale, 2013.

RENNER, Jacinta Sidegun. Prevenção de distúrbios osteomusculares relacionados ao trabalho. Boletim Saúde, v. 19, n. 1, 2005.

REPULLO-JUNIOR, R. Protocolo de diagnóstico e tratamento das LER/DORT. Boletim da Saúde, v. 19, n. 1, p. 129-135, 2005.

SAKATA, R. K.; ISSY, A. M. Lesão por esforço repetitivo (LER) doença osteomuscular relacionada ao trabalho (DORT). Revista Brasileira de Medicina, São Paulo, v. 60, edição especial, p. 77-83, 2003.

Downloads

Publicado

26-09-2025

Como Citar

VIEIRA BARBOZA, Douglas; JASMIM MEIRIÑO, Marcelo; DOS SANTOS ALVES, Maximiliano; ESPÍNDULA DA SILVA MARINHO, Rafael. Ergonomic analysis of physical load in transport and cargo handling: A case with reba method. Human Factors in Design, Florianópolis, v. 13, n. 26, p. 133–145, 2025. DOI: 10.5965/2316796313262024113-145. Disponível em: https://www.revistas.udesc.br/index.php/hfd/article/view/23383. Acesso em: 1 out. 2025.